Leafield Marine is the world leader in inflation/deflation and pressure relief valves for inflatable boats and other inflatable structures. Man of Rubber, Inc. is proud to be the exclusive distributor for Leafield Marine for the Western Hemisphere.
C7
The newest and best valve from Leafield Marine! The working mechanism of the ultra low profile C7 valve is contained in the outer part of the valve. Once removed from the boat it is easily accessible for cleaning, repair or replacement. The C7 is the valve used by the world's top inflatable boat manufacturers. Gray (black by special order)
C7 Valve - $18.95
|
 |
C7 Cap and Strap - $6.95
shown above
|
C7 Repair Kit - $8.95
includes a new spindle, spring and diaphragm
|
 |
C7 Wrench - $6.75
fits C7 on one end and A6 PR Valve on other
|
 |
A7
The original Avon valve from the 80's. Widely respected for its durability and simplicity of design, the A7 provides rapid inflation and deflation. Extremely durable and rugged it may be mounted directly to the boat material using the pressure ring or used with the recessed mounting boot. Gray (black by special order)
A7 Valve - $18.75 |
|
|
|
A7 Cap with Cord - $5.95
shown above
|
| A7 Recessed Rubber Mounting Boot - $10.95
| 
|
|
|
A7 Repair Kit - $8.95 - Includes everything needed to breath new life into an old leaky valve - diaphragm, spindle, spring and cap seal.
|
 |
|
|
B7
The B7 is identical to the A7 in regard to its inner working mechanism. It offers all the advantages of the A7 but provides a lower profile and more snag free design. Its rounded mushroom shaped cap fits closely to the surface of the boat. It clamps directly to the boat material and does not require a mounting boot to be glued in. Gray (black by special order).
B7 Valve - $18.75 |
 |
|
|
B7 Cap & Strap - $6.95
shown above
|
B7 Repair Kit - $8.95 - Includes diaphragm, spindle, spring and cap seal.
|
|
|
|
B7 Wrench - $6.75
fits B7 on one end and A6 PR Valve on other
|
 |
Pressure Relief Valve
|
A6 PR Valve
shown with optional screen
The A6 has a very low external profile and is simple to remove and clean. Choose from the following PSI settings below - 1.0, 1.75, 2.0, 2.5, 2.75, 3.25 and 4.0. Most Avon's use the 1.75 psi. If in doubt, check with the manufacturer of your boat - Gray
A6 PR Valve - $18.95
IMPORTANT - Choose A6 Pressure Setting BEFORE Clicking "Add to Cart" Button Below |
 |
|
|
|
|
A6 Screen - $3.49
shown on A6 above
|
Leafield Hose Adapters - These Leafield Hose Adapters fit all Leafield valves as well as most other valves including military screw type valves. The other end is sized for either a 1/2" or 3/4" hose.
|
 |
| Leafield Hose Adapters - $2.95
|
NEW Leafield Pressure Gauge - This is both a rugged and durable precision pressure gauge. It registers from 0.0 up to 8.6 psi or from 0.0 up to 0.6 bar. Fits all Leafield valves as well as most other valves including military screw type valves or Halkey Roberts.
|
 |
| Leafield Pressure Gauge - $44.95
|
